Availability: | |
---|---|
Quantity: | |
Has the typically shaped head (Tapered) and can be characterized by low cost-availability and a wealth of variations
[ ! ]Note the strength of under-head part.
[ ! ]Please confirm pilot hole depth on Holes may go through.
* The tightening torque (ref. value) for hardened products is strength class 8.8
Has the typically shaped head (Tapered) and can be characterized by low cost-availability and a wealth of variations
[ ! ]Note the strength of under-head part.
[ ! ]Please confirm pilot hole depth on Holes may go through.
* The tightening torque (ref. value) for hardened products is strength class 8.8
Frequently asked questions about this product (FAQ)
1. Will the positioning pins rust? If so, are there any measures to prevent it?
Positioning pins without surface treatment can rust. It is recommended to regularly apply rust preventive oil for maintenance or purchase positioning pins with surface treatment, which can prevent rust in normal atmospheric environments. Please refer to this for details
2. Why is there a undercut in the neck of the positioning pin?
Because of its high coaxiality, the neck also needs to be ground. The neck grinding process requires a back groove to ensure that the rib of the positioning pin does not produce an R angle.
3. Can shapes and sizes beyond the specifications recorded in the catalog be customized?
Can be customized with special attention. However, please provide drawings and have certain requirements for quantity when customizing. Details can be consulted jennyguo@fazcwj.com
4. Is a full inspection conducted during the quality management of positioning pins?
Strictly inspect each process link. And conduct a full inspection of the main process steps. Conduct a full inspection upon final shipment.
Frequently asked questions about this product (FAQ)
1. Will the positioning pins rust? If so, are there any measures to prevent it?
Positioning pins without surface treatment can rust. It is recommended to regularly apply rust preventive oil for maintenance or purchase positioning pins with surface treatment, which can prevent rust in normal atmospheric environments. Please refer to this for details
2. Why is there a undercut in the neck of the positioning pin?
Because of its high coaxiality, the neck also needs to be ground. The neck grinding process requires a back groove to ensure that the rib of the positioning pin does not produce an R angle.
3. Can shapes and sizes beyond the specifications recorded in the catalog be customized?
Can be customized with special attention. However, please provide drawings and have certain requirements for quantity when customizing. Details can be consulted jennyguo@fazcwj.com
4. Is a full inspection conducted during the quality management of positioning pins?
Strictly inspect each process link. And conduct a full inspection of the main process steps. Conduct a full inspection upon final shipment.