 |
| Quantity: | |
|---|---|
• Shape: Push Up Type
• Wrench Hole Shape: Hex
• Body Material: 4137 Alloy Steel
• Stroke Dimension S (mm): 1.0-4.5
• Initial Load (Range) (n): 0.01～50
W/o thread-locking adhesive type is not availablefor M3 or M4 (M3 and M4 Standard Type don'thave tread-locking adhesive applied to them.)To fix position of the ball plungermicroencapsulated anaerobic adhesive isapplied. Once parts have been loosened,adhesion is lost. Use an anaerobic thread lockingcompound when reassembling.S +2.5L-8.50B
No slits for swaging on the tip.
Min. is the initial load, and max. is the load when the tip is fully compressed. [ ! ]Extra Heavy Load Type is available from M4 size.
kgf=Nx0.101972
• Shape: Push Up Type
• Wrench Hole Shape: Hex
• Body Material: 4137 Alloy Steel
• Stroke Dimension S (mm): 1.0-4.5
• Initial Load (Range) (n): 0.01～50
W/o thread-locking adhesive type is not availablefor M3 or M4 (M3 and M4 Standard Type don'thave tread-locking adhesive applied to them.)To fix position of the ball plungermicroencapsulated anaerobic adhesive isapplied. Once parts have been loosened,adhesion is lost. Use an anaerobic thread lockingcompound when reassembling.S +2.5L-8.50B
No slits for swaging on the tip.
Min. is the initial load, and max. is the load when the tip is fully compressed. [ ! ]Extra Heavy Load Type is available from M4 size.
kgf=Nx0.101972
