 |
| Quantity: | |
|---|---|
indexing plungers are characterized by small dimensions. These indexing plungers are universally suitable due to their prevention of misalignments and positioning errors of mating indexing bores. During assembly, the maximum tightening torques shown in the table should not be exceeded when securing the lock nut.
Product Features
The front end shape can be divided into spherical, tapered, flat, and other types of front end shapes, which can be flexibly selected and used according to the purpose.
Usage method
Operating methods for reset and self-locking types
Reset type
The front end is usually in a protruding state.
When pulling out the knob, the front end retracts.
If the knob is released, the front end will restore its protruding state through the action of the built-in spring force.
• Self locking type
The front end is usually in a protruding state.
When pulling out the knob, the front end retracts.
If you rotate 90 ° while maintaining the pulled out state, the front end can be locked in a retracted state.
When unlocking, simply rotate 90 ° while maintaining the pulled out state.
If the knob is released, the front end will restore its protruding state through the action of the built-in spring force.
indexing plungers are characterized by small dimensions. These indexing plungers are universally suitable due to their prevention of misalignments and positioning errors of mating indexing bores. During assembly, the maximum tightening torques shown in the table should not be exceeded when securing the lock nut.
Product Features
The front end shape can be divided into spherical, tapered, flat, and other types of front end shapes, which can be flexibly selected and used according to the purpose.
Usage method
Operating methods for reset and self-locking types
Reset type
The front end is usually in a protruding state.
When pulling out the knob, the front end retracts.
If the knob is released, the front end will restore its protruding state through the action of the built-in spring force.
• Self locking type
The front end is usually in a protruding state.
When pulling out the knob, the front end retracts.
If you rotate 90 ° while maintaining the pulled out state, the front end can be locked in a retracted state.
When unlocking, simply rotate 90 ° while maintaining the pulled out state.
If the knob is released, the front end will restore its protruding state through the action of the built-in spring force.
