Waste discharge feature lets you use it in any orientation, up, down, left or right.
 |
| Quantity: | |
|---|---|
Can be used in any orientation, allowing for flexible mounting.
BCBE can be used in both vertical and horizontal orientations.
Issue 1
You want to use ball rollers in various orientations
Issue 2
Rotation is slowed when waste gets inside the ball roller
Try our solutions
Solution 1:
They can be used in any orientation, including face-up or face-down, so you can position it freely.
Solution 2:
The waste discharge feature increases the product's service life and reduces maintenance time compared to conventional products
An innovative solution for discharging waste has been achieved
[Enlarged view of waste discharge hole/slit]
Ball rollers with waste discharge holes do not support load on the smaller ball contact surface directly below the large ball.
This structure allows for a large number of waste discharge holes at the lowest point of the body or a waste discharge slit at the highest point of the body.
Holes have been machined in the smaller ball contact area—something that was considered difficult with conventional structures- thus allowing debris and water that have gotten inside the structure to be discharged to keep rotation continuing smoothly.
钢珠滚轮.pdf
2d_BCFH50.zip2d_BCFH50.zip
Issue 1
You want to use ball rollers in various orientations
Issue 2
Rotation is slowed when waste gets inside the ball roller
Try our solutions
Solution 1:
They can be used in any orientation, including face-up or face-down, so you can position it freely.
Solution 2:
The waste discharge feature increases the product's service life and reduces maintenance time compared to conventional products
An innovative solution for discharging waste has been achieved
[Enlarged view of waste discharge hole/slit]
Ball rollers with waste discharge holes do not support load on the smaller ball contact surface directly below the large ball.
This structure allows for a large number of waste discharge holes at the lowest point of the body or a waste discharge slit at the highest point of the body.
Holes have been machined in the smaller ball contact area—something that was considered difficult with conventional structures- thus allowing debris and water that have gotten inside the structure to be discharged to keep rotation continuing smoothly.
Can be used in any orientation, allowing for flexible mounting.
BCBE can be used in both vertical and horizontal orientations.
Issue 1
You want to use ball rollers in various orientations
Issue 2
Rotation is slowed when waste gets inside the ball roller
Try our solutions
Solution 1:
They can be used in any orientation, including face-up or face-down, so you can position it freely.
Solution 2:
The waste discharge feature increases the product's service life and reduces maintenance time compared to conventional products
An innovative solution for discharging waste has been achieved
[Enlarged view of waste discharge hole/slit]
Ball rollers with waste discharge holes do not support load on the smaller ball contact surface directly below the large ball.
This structure allows for a large number of waste discharge holes at the lowest point of the body or a waste discharge slit at the highest point of the body.
Holes have been machined in the smaller ball contact area—something that was considered difficult with conventional structures- thus allowing debris and water that have gotten inside the structure to be discharged to keep rotation continuing smoothly.
钢珠滚轮.pdf2d_BCFH50.zip2d_BCFH50.zip
Issue 1
You want to use ball rollers in various orientations
Issue 2
Rotation is slowed when waste gets inside the ball roller
Try our solutions
Solution 1:
They can be used in any orientation, including face-up or face-down, so you can position it freely.
Solution 2:
The waste discharge feature increases the product's service life and reduces maintenance time compared to conventional products
An innovative solution for discharging waste has been achieved
[Enlarged view of waste discharge hole/slit]
Ball rollers with waste discharge holes do not support load on the smaller ball contact surface directly below the large ball.
This structure allows for a large number of waste discharge holes at the lowest point of the body or a waste discharge slit at the highest point of the body.
Holes have been machined in the smaller ball contact area—something that was considered difficult with conventional structures- thus allowing debris and water that have gotten inside the structure to be discharged to keep rotation continuing smoothly.
