 |
| Quantity: | |
|---|---|
Includes a waste discharge hole/slit that allows any debris inside to be discharged.
BCBH can be used in both vertical and horizontal orientations.
The threaded part of BCS120 does not have a straight slot groove.
The thread material for BCBH120 is 304 Stainless Steel.
*Only BCBH120 has Electroless Nickel Plating surface treatment on the body.
Please note that the waste discharge mechanism only works when installed facing up.
钢珠滚轮.pdf
2d_BCFH50.zip2d_BCFH50.zip
Issue 1
You want to use ball rollers in various orientations
Issue 2
Rotation is slowed when waste gets inside the ball roller
Try our solutions
Solution 1:
They can be used in any orientation, including face-up or face-down, so you can position it freely.
Solution 2:
The waste discharge feature increases the product's service life and reduces maintenance time compared to conventional products
An innovative solution for discharging waste has been achieved
[Enlarged view of waste discharge hole/slit]
Ball rollers with waste discharge holes do not support load on the smaller ball contact surface directly below the large ball.
This structure allows for a large number of waste discharge holes at the lowest point of the body or a waste discharge slit at the highest point of the body.
Holes have been machined in the smaller ball contact area—something that was considered difficult with conventional structures- thus allowing debris and water that have gotten inside the structure to be discharged to keep rotation continuing smoothly.
Includes a waste discharge hole/slit that allows any debris inside to be discharged.
BCBH can be used in both vertical and horizontal orientations.
The threaded part of BCS120 does not have a straight slot groove.
The thread material for BCBH120 is 304 Stainless Steel.
*Only BCBH120 has Electroless Nickel Plating surface treatment on the body.
Please note that the waste discharge mechanism only works when installed facing up.
钢珠滚轮.pdf2d_BCFH50.zip2d_BCFH50.zip
Issue 1
You want to use ball rollers in various orientations
Issue 2
Rotation is slowed when waste gets inside the ball roller
Try our solutions
Solution 1:
They can be used in any orientation, including face-up or face-down, so you can position it freely.
Solution 2:
The waste discharge feature increases the product's service life and reduces maintenance time compared to conventional products
An innovative solution for discharging waste has been achieved
[Enlarged view of waste discharge hole/slit]
Ball rollers with waste discharge holes do not support load on the smaller ball contact surface directly below the large ball.
This structure allows for a large number of waste discharge holes at the lowest point of the body or a waste discharge slit at the highest point of the body.
Holes have been machined in the smaller ball contact area—something that was considered difficult with conventional structures- thus allowing debris and water that have gotten inside the structure to be discharged to keep rotation continuing smoothly.
